Leatherman Pouches/accessories - outdoorsman supplies

Search
Go to content

Main menu:

Leatherman Pouches/accessories

Knives > Leatherman
LP405 nylon pouch to fit skeletool  whitby

LP405 nylon pouch to fit skeletool whitby

This nylon belt sheath is made with sturdy ballistic nylon and features a Velcro closure and three pockets/slots for accessories. This sheath also permits holstering a tool in the open (pliers) position and allows for vertical and horizontal carry.
Fits the following models:
Charge® AL
Charge® ALX
Charge® TTi
Wave® (stainless steel)
Wave® (black oxide finish)
Internal capacity:
Height: 4" (10cm)
Width: 1.4" (3.6cm)
Depth: 0.8" (2cm)

£ 5.95 Add
LP11 leather pouch to fit juice models  whitby

LP11 leather pouch to fit juice models whitby

This stylish black leather clip-on sheath permits tool carry in open or closed position. This sheath fits any Leatherman® Juice model and features a snap closure.
Fits the following models:
Juice® C2
Juice® S2
Juice® CS4
Juice® XE6
Internal Capacity:
Height: 3.5" (8.9cm)
Width: 1.4" (3.6cm)
Depth: 0.88" (2.2cm)

£ 5.99 Add
LP650 leather/nylon pouch for wave  whitby

LP650 leather/nylon pouch for wave whitby

This leather belt sheath features the Leatherman logo with a snap closure and a side pocket for an accessory. This sheath does not fit the retired Wave® Original.
Fits the following models:
Wave® (stainless steel)
Wave® (black oxide finish)
Internal capacity:
Height: 4" (10cm)
Width: 1.5" (3.8cm)
Depth: 0.75" (1.9cm)

£ 6.95 Add
LP260 sand molle pouch

LP260 sand molle pouch

This brown, nylon MOLLE system sheath features snap webbing strap for attachment on backside. Has brown Leatherman logo and Velcro front closure.
Fits the following models:
Charge® AL
Charge® ALX
Charge® TTi
EDC Rebar®
OHT® (stainless steel)
OHT® (black/black sheath)
OHT® (black/brown sheath)
OHT® (coyote/black sheath)
OHT® (coyote/brown sheath)
Rebar® (stainless steel)
Rebar® (black oxide finish)
Skeletool®
Skeletool® CX
Skeletool® SX
Super Tool® 300 (stainless steel)
Super Tool® 300 (black oxide finish)
Surge® (stainless steel)
Surge® (black oxide finish)
Wave® (stainless steel)
Wave® (black oxide finish)
Internal capacity:
Height: 4.5" (11.4cm)
Width: 1.8" (4.6cm)
Depth: 1" (2.5cm)

£ 12.95 Add
LP250 black molle pouch to fit rebar/blast/wave surge  whitby

LP250 black molle pouch to fit rebar/blast/wave surge whitby

This black, nylon MOLLE system sheath features snap webbing strap for attachment on backside. Has grey Leatherman logo and Velcro front closure.
Fits the following models:
Charge® AL
Charge® ALX
Charge® TTi
EDC Rebar®
OHT® (stainless steel)
OHT® (black/black sheath)
OHT® (black/brown sheath)
OHT® (coyote/black sheath)
OHT® (coyote/brown sheath)
Rebar® (stainless steel)
Rebar® (black oxide finish)
Skeletool®
Skeletool® CX
Skeletool® SX
Super Tool® 300 (stainless steel)
Super Tool® 300 (black oxide finish)
Surge® (stainless steel)
Surge® (black oxide finish)
Wave® (stainless steel)
Wave® (black oxide finish)
Internal capacity:
Height: 4.5" (11.4cm)
Width: 1.8" (4.6cm)
Depth: 1" (2.5cm)

£ 12.95 Add
LP350 black molle pouch  whitby

LP350 black molle pouch whitby

This large, nylon MOLLE system sheath features a snap webbing strap on the backside for attachment. This attachment webbing can also hold a MUT® accessory wrench. The sheath features a Leatherman logo, a Velcro front closure and an internal storage panel to hold extra bits.
Fits the following models:
Super Tool® 300 (stainless steel)
Super Tool® 300 (black oxide finish)
Super Tool® 300 EOD
Surge® (stainless steel)
Surge® (black oxide finish)
MUT®
MUT® EOD
Internal capacity:
Height: 5" (12.7cm)
Width: 1.5" (3.8cm)
Depth: 0.9" (2.3cm)

£ 15.95 Add
LP360 brown molle pouch  whitby

LP360 brown molle pouch whitby

This large, nylon MOLLE system sheath features a snap webbing strap on the backside for attachment. This attachment webbing can also hold a MUT® accessory wrench. The sheath features a Leatherman logo, a Velcro front closure and an internal storage panel to hold extra bits.
Fits the following models:
Super Tool® 300 (stainless steel)
Super Tool® 300 (black oxide finish)
Super Tool® 300 EOD
Surge® (stainless steel)
Surge® (black oxide finish)
MUT®
MUT® EOD
Internal capacity:
Height: 5" (12.7cm)
Width: 1.5" (3.8cm)
Depth: 0.9" (2.3cm)

£ 15.95 Add
LT24 bit extender   whitby

LT24 bit extender whitby

Extend your reach with the 3.25" Bit Driver Extender. Holds standard Leatherman bits and standard hex bits. For use with any Leatherman tool or knife that features a large bit driver (Charge models, Surge, Wave, e306x/e307x, k502x/k503x, h502/h503)

£ 18.95 Add
LT26 removable bit driver  whitby

LT26 removable bit driver whitby

Add ten tools to your favourite Leatherman tool with the Removable Bit Driver. The set comes with a driver and five double-ended tool steel bits. The extender also works with regular 1/4” hex bits, and the handy holder will also store standard hex bits - giving you extra functionality for your favourite hobby.
Kit includes:
Bit driver
Hex 4mm and 5mm
Hex 6mm and 1/4"
Torx #10 and #15
Phillips #0 and #3
Screwdrivers Medium and Extra Small
Compatible with the following models:
Crunch®
Crater® c33T
EDC Rebar®
Rebar® (stainless steel)
Rebar® (black oxide finish)
Super Tool® 300 (stainless steel)
Super Tool® 300 (black oxide finish)

£ 24.95 Add
LT27 additional bit kit  whitby

LT27 additional bit kit whitby

The Bit Kit expands your driver’s capabilities with 21 double-ended bits—42 tools in all. Use the Bit Kit with all tools and knives with bit drivers and Removable Bit Driver.
Tools include:
Square drive #1 & #2
Torx #15 & Hex 7/64"
Torx #6 & #8
Torx #10 & #15
Torx #20 & #25
Torx #27 & #30
Screwdriver 1/8" & Torx #15
Screwdriver 1/4" & 3/16"
Phillips #2 & 3/16" Screwdriver
Phillips #0 & #3
Phillips #2 & 1/4" Screwdriver
Phillips #1-2 & #3
Screwdriver 3/32" & 1/8"
Screwdriver 5/32" & 3/16"
Screwdriver 7/32" & 1/4"
Hex 7/32" & 3/16"
Hex 5/32" & 9/64"
Hex 1/8" & 7/64"
Hex 3/32" & 5/64"
Hex 1/16" & .050"
Phillips #1 & #2
Eyeglass Screwdriver
Pozi #2 & #1
Hex 1.5mm & 2mm
Hex 2.5mm & 3mm
Hex 4mm & 5mm
Hex 6mm & 1/4"
Compatible with the following models:
Cam
Charge® AL
Charge® ALX
Charge® TTi
MUT®
MUT® EOD
Piranha
Pump
Rail
Removable Bit Driver
Removable Bit Driver (black oxide finish)
Skeletool®
Skeletool® CX
Surge® (stainless steel)
Surge® (black oxide finish)
Wave® (stainless steel)
Wave® (black oxide finish)

£ 24.95 Add
 
Back to content | Back to main menu